Metrohm viva 1.0 (process analysis) - Manual (Page 135)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 123
3.6.4.4 Determination series - Determination parameters
Tab: Workplace ▶ Run ▶ Determination series
User
If the option Enforce login with user name is activated in the security
settings, then the short name of the currently logged-in user will be dis-
played in this field. This field is then not available for editing. If work is
done without login, then a user name can be entered in this field (only in
the status READY).
Entry 50 characters
Sample number
The sample number is set to 0 for all workplaces at the time of each pro-
gram start. Each time a determination is started, it is incremented by +1. It
can be edited by the user only when it is in the status READY.
Input range 0 - 99999
Default value 0
Remark
Freely definable remark on the determination, which is saved together
with the determination. Predetermined text templates may also be
selected instead of a manual entry (see Chapter 3.5.1, page 106).
NOTE
The Remark field can be changed live also when determinations are in
progress. The Live modifications dialog window is opened with the
context-sensitive Modify remark menu item (see Chapter 3.6.3.6,
page 114).
Entry 100 characters
Autostart
Number of automatic, internal starts of determinations within a sample
series.
The first field after Autostart shows the number of determinations
already carried out (actual counter). This field cannot be edited, but it can
be reset to 0 in the status READY or PAUSE with the context-sensitive
Reset autostart counter menu item.
The second field after Autostart shows the total number of determina-
tions to be carried out per series (setpoint counter). By default, it contains
the entry Sample table indicating the number of lines in the working
sample table. This field can only be edited in the status READY.