Metrohm viva 1.0 (process analysis) - Manual (Page 438)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
426 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection Avantes Spectrometer
Default value Avantes Spectrometer
5.5.2.5.2.3 MEAS Ref - Measuring parameters
Tab: Method ▶ MEAS Ref ▶ Properties... ▶ MEAS Ref - 'Command name' ▶ Mea-
suring parameters
Command name
Name of the command.
Entry 25 characters
The parameters for the measuring procedure can be defined on this tab.
Start wavelength
Lower limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 400.0 nm
End wavelength
Upper limit of the spectrum.
Input range 100.0 - 2,000.0 nm
Default value 1,000.0 nm
Integration time
Integration time for the acquisition of the spectrum.
Input range 0.01 - 600,000 ms
Default value 6 ms
Averaged spectra
The number of spectra that are acquired and averaged.
Input range 1 - 10,000
Default value 10
Smoothing
Number of neighboring pixels with which the value for each measurement
pixel is determined.
Input range 0 - 100 pixels
Default value 0 pixels