Metrohm viva 1.0 (process analysis) - Manual (Page 185)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 173
3.10 Report subwindow
3.10.1 Report - General
Subwindow: Workplace ▶ Report
Report subwindow
The reports of determinations are displayed in the Report subwindow.
The subwindow can be activated in the Workplace program part during
the definition of the layout and thus made visible (see Chapter 3.1.7, page
77). It can be enlarged and reduced as required, and it can also be maxi-
mized.
Tabs
The subwindow consists of the following tabs:
￭ Latest report
Display of the most recently automatically generated report.
￭ Selected report
Display of the report selected in the report overview.
￭ Report overview
Overview of the reports saved in the workplace.
3.10.2 Latest report
Tab: Workplace ▶ Report ▶ Latest report
The report most recently generated in the method run is automatically dis-
played on the Latest report tab. The content and format of the reports
are determined by the report template selected.
3.10.3 Selected report
Tab: Workplace ▶ Report ▶ Selected report
The report selected in the report overview is shown on the Selected
report tab. The content and format of the reports are determined by the
report template selected.
3.10.4 Report overview
Tab: Workplace ▶ Report ▶ Report overview
The reports of the determinations since program start are shown in a table
on the Report overview tab. The lines are arranged chronologically in
ascending order. The table is automatically updated as new reports are
received.
The table contains the following columns, which can be enlarged,
reduced and moved with the mouse: