3 digital outputs, 1 digital outputs - overview – Metrohm viva 1.0 (process analysis) User Manual
Page 899
■■■■■■■■■■■■■■■■■■■■■■
8 Manual control
viva 1.0 (for Process analysis)
■■■■■■■■
887
Graphical display
Overview of the statuses of a digital input:
ACTIVE
INACTIVE
ERROR
Display flashes
8.4.6.3
Digital outputs
8.4.6.3.1
Digital outputs - Overview
Program part: Manual control
If the Digital outputs branch is selected in the device list, then all out-
puts can be commonly controlled in the Functions/Parameters subwindow
on the Switch on/off and Set default tabs. The status of all connected
digital outputs is shown in their physical order in the subwindow for the
graphical display.
Switch on/off
[Start]
Sets all digital outputs to ACTIVE.
[Stop]
Sets all digital outputs to INACTIVE.
Set default
[Set]
Resets all digital outputs to the default value in the configuration.
Graphical display
Example: