2 digital input – Metrohm viva 1.0 (process analysis) User Manual
Page 898
8.4 Manual control - Functions
■■■■■■■■■■■■■■■■■■■■■■
886
■■■■■■■■
viva 1.0 (for Process analysis)
DigIn_1_1_1
Emergency
stop
Status: ACTIVE
DigIn_1_1_2
General input
Status: ACTIVE
DigIn_1_1_3
Level detector
Status: INAC-
TIVE
DigIn_1_1_4
Leak detector
Status: INAC-
TIVE
DigIn_1_2_1
General input
Status: INAC-
TIVE
DigIn_1_2_2
General input
Status: INAC-
TIVE
DigIn_1_2_3
General input
Status: INAC-
TIVE
DigIn_1_2_4
General input
Status: INAC-
TIVE
8.4.6.2.2
Digital input
Program part: Manual control
If a single digital input is selected in the instrument list, then the properties
of the input are displayed in the subwindow for functions/parameters.
The status of the input is displayed in the subwindow for the graphical dis-
play.
Digital input
Port description
Display of the port description.
Port
Display of the internal description of the port.
Type
Display of the port type.
Status
Display of the current status.
Selection
ACTIVE | INACTIVE | ERROR