Metrohm viva 1.0 (process analysis) - Manual (Page 165)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 153
3.8.5 Live display - Properties
Dialog window: Workplace ▶ Live display 1 / Live display 2 ▶ Properties Live dis-
play 1 / 2
Command type
Selection of the command type for which the properties in the live display
are to be defined. The curve properties defined for each command type
are saved per live display window and per client.
Selection CVS | MEAS Opt | MEAS TMF
Default value CVS
Measured value display
on | off (Default value: off)
If this check box is activated, then the measured values required are dis-
played in the Live display subwindow.
Measured value 1
Selection of the measured value for measured value display 1. The mea-
sured quantities and the default value depend on the Command type
selected.
CVS
Selection
Current | Voltage | Time | Time to finish | Cur-
rent measuring range | off
Default value Voltage
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | dε/dt |
Calculated 1 - 3 | External 1 - 3 | off
Default value Measured value
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dε/dt | off
Default value Measured value
Measured value 2
Selection of the measured value for measured value display 2. The mea-
sured quantities and the default value depend on the Command type
selected.