Metrohm viva 1.0 (process analysis) - Manual (Page 389)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 377
NOTE
No voltammetry commands (CVS) can be inserted in an exit track.
5.5.1.2.7 Error track
Subwindow: Method
An error track is a track that can be created manually by the user with
Insert
▶ New track... ▶ Error track or with the symbol. It starts
with the ERROR command (see Chapter 5.5.2.2.8, page 395) and ends
with the END command. Only one error track can be inserted in a given
method.
If an error track is present in the method, then no error message will be
displayed in the event of an error in the run, but the error track will be
executed. In this case, the error track assumes the function of the main
track. Normal tracks can also be called from it.
NOTE
No voltammetry commands (CVS) can be inserted in an error track.
5.5.1.3 Editing tracks
Subwindow: Method
The following processing functions for tracks are available for a method
currently opened in the main window:
￭ Inserting a new track
￭ Selecting a track