Metrohm viva 1.0 (process analysis) - Manual (Page 587)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 575
Input range 0 - 999,999
Default value 10
Selection s | min
Default value s
End delay
Waiting time after the maximum waiting time has expired.
Input range 0 - 999,999
Default value 0
Selection s | min
Default value s
5.5.2.11.8 PORT
5.5.2.11.8.1 PORT - Overview
Dialog window: Method ▶ PORT ▶ Properties... ▶ PORT - 'Command name'
Command for changing the port position on a multi-port valve.
Instruments
This command can be executed with the following instruments:
Titrando: 901, 902, 904, 905, 906, 907
Dosing Interface: 846
Appearance
The command has the following appearance:
Parameters
The parameters for the PORT command are configured in the following
dialog window:
￭ PORT - Properties
Command variables
The following command variables are generated by the PORT command
in the method run and can be used in formulas under the designation
'Command name.Variable identification':