Metrohm viva 1.0 (process analysis) - Manual (Page 397)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 385
Electrode test for VA measuring commands
Electrode test
on | off (Default value: on)
If this check box is activated, then an electrode test will be performed for
the reference and auxiliary electrodes before the first VA measuring com-
mand is carried out for methods with VA measuring commands. This test
checks whether an electrode is connected and ready for operation. An
electrode test is performed only once for each determination.
5.5.2.2.2.3 START - Application note
Tab: Method ▶ START ▶ Properties... ▶ START - 'Command name' ▶ Application
note
Command name
Name of the command.
Entry 25 characters
The application note defined in the text window is displayed on the
Application note tab in the Live display subwindow of the Work-
place program part. The tab opens automatically when the method is loa-
ded.
The text editor to create or modify the application note is started with
or by double-clicking on the text field (see Chapter 2.4.2, page 69).
5.5.2.2.2.4 START - Sample data variables (table)
Tab: Method ▶ START ▶ Properties... ▶ START - 'Command name' ▶ Sample data
variables
Command name
Name of the command.
Entry 25 characters
Here you have to specify the sample data variables that are to be available
within the method under the designation SD.'Variable name'. By
default, the sample data variables ID1, ID2, ID3, Sample type, Sample
position, Sample amount, Sample amount unit, Analytical volume
and Dilution volume are entered.
New sample data variables can be assigned to one of the still available
sample data variables (entry in the Assignment field) or a fixed value can
be determined for them (entry in the Fixed value field).
The overview table shows all specified sample data variables and cannot
itself be directly edited. The table can be sorted according to the selected