Metrohm viva 1.0 (process analysis) - Manual (Page 252)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
240 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Lower limit
Lower warning limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Upper limit
Upper warning limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Intervention limits
Intervention limits are displayed in red on the control chart.
Lower limit
Lower intervention limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
Upper limit
Upper intervention limit.
Entry 10 digits
Input range -1.0E8 - 1.0E8 (max. 10 digits)
4.4.2.2.4 Control chart template - Statistics
Tab: Database ▶ Tools ▶ Templates ▶ Control chart templates... ▶ Control chart
templates ▶ [Properties] ▶ Properties - Control chart - 'Name' ▶ Statistics
Definition of the display of statistics data on the control chart.
Show statistics data
on | off (Default value: on)
If this control chart is activated, then the statistics data for mean value,
standard deviation, number of measuring points and minimum
and maximum value will be shown underneath the graph display.
Draw in mean value
on | off (Default value: on)
If this check box is activated, then the Mean value will be shown on the
control chart as a continuous line in the color of the measured values.