Metrohm viva 1.0 (process analysis) - Manual (Page 216)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
204 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Selection of the zoom level (see Chapter 4.4.1.4.2.7, page 211).
Activates/deactivates the grid display (see Chapter 4.4.1.4.2.10, page 213).
Activates/deactivates snapping to grid (see Chapter 4.4.1.4.2.10, page 213).
4.4.1.4.1.5 Report template - Module-specific toolbar
Program window: Database ▶ Report template - 'Name'
Depending on the module selected in the report template, other icons and
input fields, with which the properties of these modules can be directly
edited, are shown below the general toolbar (see Chapter 4.4.1.4.1.6,
page 204).
4.4.1.4.1.6 Report template - Module bar
Program window: Database ▶ Report template - 'Name'
If this option is enabled, then modules in the report template can be selected,
reduced/enlarged and moved (see Chapter 4.4.1.4.2.6, page 210).
If this option is enabled, then text fields can be inserted in the report template
(see Chapter 4.4.1.4.3.1, page 215).
If this option is enabled, then data fields can be inserted in the report template
(see Chapter 4.4.1.4.3.2, page 216).
If this option is enabled, then date fields, in which the actual date is entered,
can be inserted in the report template (see Chapter 4.4.1.4.3.3, page 218).
If this option is enabled, then time fields, in which the actual time is entered,
can be inserted in the report template (see Chapter 4.4.1.4.3.4, page 220).
If this option is enabled, then fields in which the page number is entered can
be inserted in the report template (see Chapter 4.4.1.4.3.5, page 221).
If this option is enabled, then fields in which the number of pages is entered
can be inserted in the report template (see Chapter 4.4.1.4.3.6, page 223).
If this option is enabled, then fixed reports can be inserted in the report tem-
plate (see Chapter 4.4.1.4.3.7, page 225).