Metrohm viva 1.0 (process analysis) - Manual (Page 651)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 639
Calibration factor
Suppressor concentration in the sample solution without dilution:
Suppressor concentration in the sample solution with dilution:
Variable Description
Concentration of the suppressor standard solution for
creating the calibration curve.
Effective addition volume of the suppressor standard
solution on the evaluation criterion.
Total volume (calibration) in the measuring vessel at the
moment of the measurement of the VMS by calling the
measuring command via the command CALL VMS at
the moment of calibration.
Suppressor concentration in the sample solution.
Effective addition volume of the suppressor solution on
the evaluation criterion.