Metrohm viva 1.0 (process analysis) - Manual (Page 413)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 401
Identification Description
START Start base point, where the peak evaluation baseline
begins
END End base point, where the peak evaluation baseline
ends
AREANORM Standardized peak area (AREA/AREA.MNV).
AREA.MNV = VMS.AREA.MNV or INTER-
CEPT.AREA.MNV (only one of these two variables
may be present in a determination)
HGTNORM Standardized peak height (HGT/HGT.MNV).
HGT.MNV = VMS.HGT.MNV or INTER-
CEPT.HGT.MNV (only one of these two variables
may be present in a determination)
Result variables per substance and variation
Designation 'RS.'Command name'.'Substance name'.VAR{x}.Varia-
ble identification'
Identification Description
AREA.MNV Mean value of the peak areas of all replications
AREA.ASD Absolute standard deviation of the peak areas of all
replications
AREA.RSD Relative standard deviation of the peak areas of all
replications
AREA.MNVD
ELTA Difference between the mean value of the peak
areas of all replications for measurement {x} and the
mean value of the peak areas of all replications for
measurement {x-1}
HGT.MNV Mean value of the peak heights of all replications
HGT.ASD Absolute standard deviation of the peak heights of
all replications
HGT.RSD Relative standard deviation of the peak heights of all
replications
HGT.MNVDE
LTA Difference between the mean value of the peak
heights of all replications for measurement {x} and
the mean value of the peak heights of all replications
for measurement {x-1}
Result variables per variation