Metrohm viva 1.0 (process analysis) - Manual (Page 535)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 523
5.5.2.9.2 CTRL
5.5.2.9.2.1 CTRL - Overview
Dialog window: Method ▶ CTRL ▶ Properties... ▶ CTRL - 'Command name'
Command for setting remote output lines.
Instruments
This command can be executed with the following instruments:
Voltammetry: 894
Dosing Interface: 846
Sample changer: 814, 815, 858, 919
Spectrometer: Avantes
Appearance
The command has the following appearance:
Parameters
The parameters for the CTRL command are configured in the following
dialog window:
￭ 5.5.2.9.2.2CTRL - Properties
Command variables
The following command variables are generated by the CTRL command
in the method run and can be used in formulas under the designation
'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended