Metrohm viva 1.0 (process analysis) - Manual (Page 814)

7.7 089 Photometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
802 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Device type
Shows the device type.
Program version
Shows the program version of the device.
[Update]
Opens the Load new program version dialog window (see Chapter
7.1.6, page 757).
This button is displayed only with devices that have their own firmware. It
is only enabled if the device has an old program version that is not sup-
ported by viva and that can be updated by viva itself.
Device serial number
Shows the serial number of the device.
FPGA version
Shows the FPGA version of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Remarks
Remarks about the device.
Entry 1,000 characters
Default value 'empty'
7.7.3 Properties - Settings
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Settings
Light source
Wavelength
Wavelength which has been set on the Photometer. If a value is defined
here, a check is performed for each command containing a specified
wavelength whether the wavelength specified in the command corre-
sponds with the wavelength defined here for the device.
Input range 100 - 2,000 nm
Selection 'empty'
Default value 'empty'