Metrohm viva 1.0 (process analysis) - Manual (Page 34)

2.3 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Sample data variables
Designation Description Data type
VAL Value of the sample data variable (optional, i.e., 'SD.Factor' = SD.Factor.VAL')
(Text, Number or Date/Time) Text, Number
or Date/Time
OVF Exceeding limits for sample data variable (Number: 1 = limit exceeded, 0 =
limit not exceeded) Number
In the following lines you will find the sample data variables present in the default settings which appear in the Work-
place and which can be edited and deleted in the START command of the corresponding method.
ID1 Value of ID1 Text, Number
or Date/Time
ID1.OVF Exceeding limit for ID1 Number
ID2 Value of ID2 Text, Number
or Date/Time
ID2.OVF Exceeding limit for ID2 Number
ID3 Value of ID3 Text, Number
or Date/Time
ID3.OVF Exceeding limit for ID3 Number
Sample type Value of Sample type Text
Sample
type.OVF Exceeding limit for Sample type Number
Sample posi-
tion Value of Sample position Number
Sample posi-
tion.OVF Exceeding limit for Sample position Number
Sample
amount Value of Sample amount Number
Sample
amount.OVF Exceeding limit for Sample amount Number
Sample
amount unit Value of Sample amount unit Text
Sample
amount
unit.OVF Exceeding limit for Sample amount unit Number
Analytical
volume Value of Analytical volume Number
Analytical
volume.OVF Exceeding limit for Analytical volume Number
Dilution vol-
ume Value of Dilution volume Number