3 call - call – Metrohm viva 1.0 (process analysis) User Manual
Page 425
■■■■■■■■■■■■■■■■■■■■■■
5 Method
viva 1.0 (for Process analysis)
■■■■■■■■
413
NOTE
The CALL command waits until all of the called tracks have been com-
pleted or have reported in. If there is to be no waiting for the comple-
tion of a track, then the Return immediately check box must be acti-
vated in the respective track command (see Chapter 5.5.2.2.1, page
381).
[New]
Opens the Call - New dialog window to enter a new call (see Chapter
5.5.2.4.2.3, page 413).
NOTE
A maximum of 10 calls can be entered.
[Properties]
Opens the Call - 'Call text' dialog window to edit the call selected in the
table (see Chapter 5.5.2.4.2.3, page 413).
[Delete]
Deletes the selected call.
5.5.2.4.2.3
CALL - Call
Dialog window: Method
▶ CALL ▶ Properties... ▶ [New]
Call text
Freely editable text for the designation of the call that is displayed in the
command depiction.
Entry
50 characters
Default value
'empty'
Track name
Selection of the track to be called up. All of the normal tracks available in
the method (with the exception of the main track) are displayed.
Selection
'Track name' | 'empty'
Default value
'empty'