Metrohm viva 1.0 (process analysis) - Manual (Page 487)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 475
￭ ADD SAMPLE DT
Doses the sample for DT.
￭ LQH
Extensive dosing possibilities with a Dosino.
￭ PREP
Prepares a dosing unit.
￭ EMPTY
Empties a dosing unit.
￭ RLS DOS
Releases a dosing unit.
5.5.2.7.2 ADD AUX
5.5.2.7.2.1 ADD AUX - Overview
Dialog window: Method ▶ ADD AUX ▶ Properties... ▶ ADD AUX - 'Command
name'
Command for the addition of auxiliary solutions.
Appearance
The command has the following appearance:
Parameters
The parameters for the ADD AUX command are configured in the follow-
ing dialog window:
￭ ADD AUX - Properties
Command variables
The following command variables are generated by the ADD AUX com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
CYL Cylinder volume of the dosing unit used for the com-
mand
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended