Metrohm viva 1.0 (process analysis) - Manual (Page 240)

4.4 Templates
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
228 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Inserting
In order to insert a result table in a report template the corresponding
icon must be selected on the module bar and then placed on the report
template by creating a field with the left-hand mouse key.
Properties - Result table field
X pos.
Shows the predefined X position for the field.
Y pos.
Y position within the permitted range.
Input range 0.0000 - (max. page height) mm
Width
Shows the predefined width of the field.
Height
Height of the field.
Input range 0.0000 - (max. page height) mm
Selection of the available Windows fonts.
Font size in pt.
Color selection.
Curve results
Option for representing a table with curve results (area, height, peak
potential, etc.).
Substance results
Option for representing a table with substance results of a measuring
command. These are results that occur only once per substance.
Measuring command
Selection list with all VA measuring commands with data acquisition
defined in the method.