Metrohm viva 1.0 (process analysis) - Manual (Page 752)

6.10 Global variables subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
740 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Message
The message options can only be edited if monitoring of the global varia-
ble is activated.
Message by e-mail
on | off (Default value: off)
The message is sent to the address defined under [E-mail...] if this check
box is activated. The message is sent in text format.
[E-mail...]
[E-mail...] opens the Send e-mail window.
Acoustic signal
on | off (Default value: off)
If this check box is activated, an acoustic signal will be emitted in addition
to the message.
Action
The actions can only be edited if monitoring of the global variable is
switched on.
If during global variable monitoring it is found that the validity period has
expired, then one of the following actions will be triggered automatically
during the start test:
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period of the global variable has expired
will be automatically saved in the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued, then the message
that the validity period of the global variable has expired will be auto-
matically saved with the determination.
Cancel determination
The ongoing determination will be automatically canceled. The follow-
ing message must be confirmed with [OK].