Metrohm viva 1.0 (process analysis) - Manual (Page 685)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 673
6.3.2.2 Backing up configuration data manually
Dialog window: Configuration ▶ File ▶ Backup ▶ Manually ▶ Backup configuration
data manually
Backup target
Backup directory
Selection of a predefined backup directory (see Chapter 6.2.3.2.1, page
663).
NOTE
Make sure that you have read and write permission for the selected
directory.
Backup name
Selection of an already existing name or entry of a new name for the
backup file. If an existing backup file is selected, it will be overwritten.
Entry 50 characters
Selection 'Backup name'
NOTE
If the backup directory is on a network drive, then the date of the
backup should be added to the Backup name, because the backup
date information is not available when the data is restored.
[Start]
Starts the manual backup of the complete configuration database (includ-
ing method groups and methods).
6.3.2.3 Restoring configuration data
Dialog window: Restore configuration data
Dialog window "Restore configuration data"
Backup directory
Selection of a directory predefined in the program administration that
contains the backed-up configuration database.
Selection 'Backup directories'