Metrohm viva 1.0 (process analysis) - Manual (Page 166)

3.8 Live display subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
154 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
CVS
Selection
Current | Voltage | Time | Time to finish | Cur-
rent measuring range | off
Default value Current
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | dε/dt |
Calculated 1 - 3 | External 1 - 3 | off
Default value Intensity
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dε/dt | off
Default value Transmission
Measured value 3
Selection of the measured value for measured value display 2. The mea-
sured quantities and the default value depend on the Command type
selected.
CVS
Selection
Current | Voltage | Time | Time to finish | Cur-
rent measuring range | off
Default value Time
MEAS Opt
Selection
Time | Measured value | Intensity | Transmis-
sion | Saturated pixels | Temperature | dε/dt |
Calculated 1 - 3 | External 1 - 3 | off
Default value Transmission
MEAS TMF
Selection
Time | Measured value | Transmission | Tem-
perature | dε/dt | off
Default value Time
Curve display
on | off (Default value: on)
If this check box is activated, then the required curves are displayed in the
Live display subwindow.
x Axis
Selection of the quantity shown on the x axis.