Metrohm viva 1.0 (process analysis) - Manual (Page 598)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
586 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Buttons
[Close]
With this button, the data modified in the dialog window for the dis-
played substance is not adopted and the dialog window is closed.
[OK]
With this button, the data modified in the dialog window for the dis-
played substance is adopted and the dialog window is closed.
5.6.4 Evaluation - Standards
5.6.4.1 Standards - General
Subwindow section: Method ▶ Evaluation ▶ Standards
Application
The standard solutions for the calibration are defined in the Evaluation -
Standards section of the evaluation. The term "Standards" designates all
calibration solutions and spiking solutions for calibration methods. The
solutions defined here are defined globally for the entire method; they are
not specific to a command.
Tabs
￭ Standards
5.6.4.2 Standards - Standards
Subwindow section: Method ▶ Evaluation ▶ Standards ▶ Standards
Table
The table of standard solutions contains the standards defined for the
method with the corresponding concentrations for the substances. If a
substance is defined in more than one command, it is only listed once.
The table cannot be edited and contains the following columns:
Substance
Name of the substance.
'Standard name'
Name of the standard.
Modifies the sequence of shown substances by moving the selected line
upward.