Metrohm viva 1.0 (process analysis) - Manual (Page 742)

6.9 Common variables subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
730 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
NOTE
In contrast to automatic value assignment, no new date is entered
when the value is assigned manually if the value remains unchanged.
Assignment method
Name of the method with which the last value assignment was carried
out. If the value has been entered manually, then manual will be shown
here.
User
Short name of the user who was logged in during value assignment or
who entered the value manually. If the login function is not used, then the
user logged in under Windows will be entered automatically.
Common Variable monitoring
on | off (Default value: off)
If this check box is activated, then the validity of the common variables is
monitored.
Validity
Validity period of the common variable in days. If a value is entered here,
then the Next assignment field will be adjusted automatically.
Input range 0 - 999 days
Default value 999 days
Next assignment
Date on which the next value assignment must take place. The date can
be selected by clicking on in the Select date dialog window (see
Chapter 2.4.1, page 68). After a date has been entered, the value for the
Validity will be automatically adjusted.
Selection Date selection
Message
The message options can only be edited if monitoring of common varia-
bles is enabled.
Message by e-mail
on | off (Default value: off)
The message is sent to the address defined under [E-mail...] if this check
box is activated. The message is sent in text format.