3 properties - general, Properties - general – Metrohm viva 1.0 (process analysis) User Manual
Page 826
7.9 Barcode reader
■■■■■■■■■■■■■■■■■■■■■■
814
■■■■■■■■
viva 1.0 (for Process analysis)
7.9.3
Properties - General
Tab: Configuration
▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name'
▶ General
General properties of the device are displayed on the General tab.
Device name
Name of the device, can be freely defined by the user.
Entry
50 characters
Default value
Device type number_#
Device type
Shows the device type.
Program version
Shows the program version of the device.
[Update]
Opens the Load new program version dialog window (see Chapter
7.1.6, page 757).
This button is displayed only with devices that have their own firmware. It
is only enabled if the device has an old program version that is not sup-
ported by viva and that can be updated by viva itself.
Device serial number
Shows the serial number of the device.
FPGA version
Shows the FPGA version of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Remarks
Remarks about the device.
Entry
1,000 characters
Default value
'empty'