Metrohm viva 1.0 (process analysis) - Manual (Page 24)

2.2 Login / password protection
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
￭ A login with user name and password is required each time the
program is started.
￭ User names must be unique. Users entered once cannot be deleted.
￭ Passwords must be unique for each user. None of the expired pass-
words already used once by the user may be reused.
￭ Passwords must be changed after a defined validity period.
￭ The number of login attempts is limited. If this number is exceeded,
the user will automatically be set to the status inactive.
Actions
If the login is activated, the following actions can be performed:
￭ Logging in at program start
￭ Logging out manually
￭ Logging out automatically
￭ Changing password
2.2.2 Logging in
Program parts: Workplace / Database / Method / Configuration
If both of the options Enforce login with user name and Enforce
login with password are activated in the Security settings, the Login
dialog window will appear each time the program is started and after
each time a user logs out.
User
Entry of a short name for the user.
Entry 24 characters
Password
Entry of the password.
Entry 24 characters
NOTE
Users who log in for the first time or users whose status has been reset
from disabled or removed back to enabled must log in with the
Start password (see Chapter 6.2.1.3, page 654) specified by the
administrator. Afterwards, the Change password window, in which a
new password needs to be entered, will open automatically.
[Change password]
Opens the Change password window, in which the new password
needs to be entered and confirmed.