Metrohm viva 1.0 (process analysis) - Manual (Page 546)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
534 ￭￭￭￭￭￭￭￭
viva 1.0 (for Process analysis)
Unit
Selection min | s
Default value s
Message
This message defined here is displayed in the live window while waiting
for the result. The text editor for entering or editing the message is
opened with or by double-clicking on the text field.
5.5.2.9.5.3 RECEIVE - Wait for event/status
Dialog window: Method ▶ RECEIVE ▶ Properties... ▶ [New]/[Properties] ▶ Wait for
event/status
Command
Name of the command whose event message or status is to be waited
for.
Selection 'Command name'
Event message
Selection of the event message to be waited for, or of the status to be
waited for. The following event messages and statuses can be selected.
Selection 'Event message' | Start
Default value Start
The following event messages and statuses can be selected:
Event/
Status Type Meaning Com-
mands
Start Event The command has just now been
started. All
End Event The command has just now been
ended. All
Busy Status System is in status BUSY, HOLD or
ERROR. All
Finished Status The command is ended. In the event
that the command is run through
several times (e.g. within a LOOP),
the status Finished will be set
already after the first time the com-
mand is ended All