Metrohm viva 1.0 (process analysis) - Manual (Page 383)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 371
User group
Names of the user groups.
Execute
on | off (Default value: on)
Permission to start methods from a method group. Methods in this group
can only be opened and started but cannot be edited or deleted.
Edit
on | off (Default value: on)
Permission to edit methods from a method group. Methods in this group
can be opened, started, edited and deleted. New methods can be added
as well.
5.5 Method run subwindow
The run instruction for the processing of a sample is defined in the
Method run subwindow. Each method contains tracks (subprograms)
consisting of individual commands.
5.5.1 Tracks
5.5.1.1 Tracks - General
Subwindow: Method
Definition
A track is a partial run of a method consisting of commands. Apart
from the main track, which is present in each method, there are: nor-
mal tracks, which can be created by the user and which are called with
the CALL command; VA tracks, which are called with the CALL VA,
CALL VMS, CALL INTERCEPT or CALL COND commands; and special
tracks (series start track, series end track, exit track and error track),
which cannot be called but which are automatically started if certain
events occur.
Structure
Each track contains the START or TRACK command and the END com-
mand; between these, any commands can be inserted.