Metrohm viva 1.0 (process analysis) User Manual
Page 462
5.5 Method run subwindow
■■■■■■■■■■■■■■■■■■■■■■
450
■■■■■■■■
viva 1.0 (for Process analysis)
089 Photometer
Input range
0.25 - 999,999.00 s (Increment: 0.25)
Default value
2.0 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range
0 - 1E+10 (max. 10 digits)
Default value
0.0
Selection
off
Default value
off
off
No stop.
Measurement without drift control
If the option Measurement without drift control has been selected,
then the following parameters will be displayed:
Measuring time
Duration of the absorbance measurement.
Input range
0 - 999,999 s
Default value
120 s
Measuring interval
Time interval for entering a measured value in the measuring point list.
Avantes Spectrometer
Input range
0.1 - 999,999.0 s (Increment: 0.1)
Default value
2.0 s
089 Photometer
Input range
0.25 - 999,999.00 s (Increment: 0.25)
Default value
2.0 s
Stop measured value
Stop when the entered measured value has been reached since the start
of the measurement.
Input range
0 - 1E+10 (max. 10 digits)
Default value
0.0
Selection
off
Default value
off
off
No stop.