Metrohm viva 1.0 (process analysis) - Manual (Page 323)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 311
4.6.1.4 Curves - Measuring point list
Subwindow: Database ▶ Curves #
The context-sensitive Measuring point list... menu item in the curve
window opens the Measuring point list - 'Command name.#' dialog
window for displaying the measuring point list of the selected curve.
The display of the measuring points in the table can be defined per win-
dow and per command type (see Chapter 4.5.2.5.5.2.4.3.5, page 294).
NOTE
No measuring point lists can be displayed for curves that have been
generated with the CVS measuring command.
4.6.2 Curve properties
4.6.2.1 Curve properties - General parameters
Dialog window: Database / Workplace ▶ Curves # ▶ Properties Curves #
Command type
Selection of the command type for which the curve properties are to be
defined. The curve properties defined for each command type are saved
per curve window and per client.
Selection CVS | MEAS Ref | MEAS Spec | MEAS Opt | CAL
Spec | MEAS TMF
Default value CVS
NOTE
When the dialog window is opened, the Command type that applies
for the curve shown in the curve window will be selected by default.
4.6.2.2 Curve properties CVS
4.6.2.2.1 Curve properties CVS - x axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ x Axis
Parameters for the graphical display of the curves on the x axis.
Quantity
Selection of the quantity to be shown on the x axis.