Metrohm viva 1.0 (process analysis) - Manual (Page 283)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.0 (for Process analysis)
￭￭￭￭￭￭￭￭ 271
the bottom right to the top left or using the context-sensitive Show all
menu command.
NOTE
When a new determination is selected the complete curve is always
shown, i.e., the zoom range is not retained when the determination is
changed.
Context-sensitive menu items for graph
Show all Resets the zoom and shows curves completely.
Properties... Opens the Properties - Reprocess curves dialog window to define the prop-
erties of the curve display (see Chapter 3.9.2.2, page 163).
Copy graphics Copies curves to the clipboard.
Table of measurement curves
A list of the measurement curves recorded is shown in the table below the
curve display. It contains the following columns:
CALL
Name of the CALL command that has called the corresponding VA track.
Var
Variation number.
Rep
Replication number.
Display
on | off (Default value: on)
Indicates whether a measurement curve is displayed in the curve window
or not.
Context-sensitive menu items for table
The table cannot be edited directly but only via the following context-sen-
sitive menu items:
On The check box in the Display column for the selected measurement curve is
activated.