Fagor America CNC8070 - Manual (Page 105)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
MANUAL (
J
OG)
MODE
O
per
at
io
n
s
wi
th
t
he
axe
s
4.
(S OFT V03.0 X )
71
Individual handwheel
The individual handwheel is associated with a particular axis. The CNC moves each
axis as its relevant handwheel is turned depending on the setting of the selector
switch and on the turning direction of the handwheel.
When moving several axes simultaneously using handwheels, all the axes having
their own handwheel plus another one selected with the general handwheel may be
involved.
When moving several axes at the same time, the feedrate of each axis depends on
how fast its associated handwheel is turned.
It may happen that depending on the turning speed and the selector position,
the CNC be demanded a faster feedrate than the maximum allowed. In that
case, the CNC will move the axis the indicated distance but at the maximum
feedrate allowed. i