9 teach-in on / teach-in off, Teach-in on / teach-in off, Cnc 8070 – Fagor America CNC8070 User Manual
Page 145
Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Ed
it
ing wi
ndo
w (
s
of
tk
eys)
6.
(S
OFT
V03.0
X
)
111
6.3.9
TEACH-IN ON / TEACH-IN OFF
It is used to activate or deactivate the TEACH-IN mode; in this mode, the axes may
be moved manually and their position may be assigned to a block.
When active, the top of the editing window shows the position of the axes defined as
“visible” for the TEACH-IN mode. See
When TEACH-IN mode is active, it is possible to keep editing the coordinates of the
axes directly from the keyboard or they may be assigned the current position of the
machine axes. Both editing methods may be used indistinctly, even while defining a
block.
To define the coordinates of one or several axes using TEACH-IN:
1. Move the axes to the desired position using the JOG keys, the handwheels or the
MDI mode.
2. In the part-program, edit the name of the axes whose position is to be defined or
not select any axis if you wish to define the position of all of them.
3. Press the [RECALL] key.
• If an axis has been edited, the CNC assigns the current position of that axis
as the program coordinate. The axis is displayed in the TEACH-IN window.
• If no axis has been edited, a block is edited with the current position of all the
a x e s d e f i n e d a s “ s e l e c t e d ” f o r t h e T E AC H -I N m o d e . S e e