Fagor America CNC8070 - Manual (Page 149)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
G
ra
phi
cs wi
n
dow
6.
(S OFT V03.0 X )
115
Conditional stop during simulation
It simulates the external "conditional stop" switch.
While active, the program simulation will be interrupted at the blocks having a
"conditional stop" function "M01". The simulation will resume when pressing the
START icon.
Software limits
It activates or deactivates the software limits for program simulation.
With the limits activated, if the software limits are reached during simulation, a
simulation error message will be issued. If not active, the software limits will be
ignored during simulation.
Block jump
It simulates the external "block skip" switch.
While active, the blocks having the block-skip character "/" will be ignored (not
simulated).
Cancel channel synchronization
There is one icon for each channel. It cancels the channel synchronization wait
periods during simulation.
When active, the wait period will end immediately and it will resume the execution
of the program.