Fagor America CNC8070 - Manual (Page 316)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
13.
SETUP ASSI
STANCE
The Bode
di
agr
am
(S OFT V03.0 X )
282
Softkey menu
There are some horizontal and vertical softkeys for changing the various options:
Horizontal softkey menu
The horizontal softkey menu offers the following options:
‡ Softkey
ANALYZE AXIS
This softkey begins the estimation of the frequency response of the selected axis
by means of the options.
‡ Softkey
END ANALYSIS
This softkey ends the estimation of the frequency response of the selected axis
by means of the options.
‡ Softkey
PRINT
This softkey serves to send the Bode graph as a bitmap out to a printer or to a
file. This makes it possible to print the screen. The border is removed when
printing the screen.
‡ Softkey
CLEAR SCREEN
This softkey initializes the graphics.
‡ Softkey
DIMENSIONS
This softkey serves to modify the maximum and minimum gains represented in
the graphics. Pressing this options displays a new menu with two horizontal
softkeys.
• Softkey EDIT
This softkey serves to edit the limit values.
• Softkey AUTOMATIC
This softkey adjusts the limits to the maximum and minimum values obtained
from analyzing the axis.
‡ Softkey
OPTIONS
This softkey serves to configure the data for the analysis and the way the graphics
will look. This option gives access to the following configuration windows:
1. Parameters window:
This window may be used to configure the data used to analyze the axes.
These data are:
Axis name: Name of the axis to be analyzed.
Number of measurements: Number of measurements for each frequency (it
shows the average between the maximum and the minimum response
amplitudes of each repetition)