Fagor America CNC8070 - Manual (Page 267)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operation manual
8070 CNC
PLC
"O
ut
put
s"
ser
v
ic
e
11.
(S OFT V03.0 X )
233
11.8.1 Options of the "Outputs" service
When accessing the "Outputs" service, the softkeys will show the following option.
Outputs "Compiling info"
It shows the result of compiling (generating) the PLC program. The screen shows a
list of warning or errors detected when compiling the PLC program.
Outputs "Checking info"
It shows the result of analyzing the file of mnemonics. The screen shows a list of the
error detected when analyzing the program.
After selecting a warning or error from the list, it is possible to go to the erroneous
line by pressing the relevant icon.
Outputs "Search info"
It shows the result of searching text in the programs making up the PLC project.
After selecting an element from the list, it is possible to go to its line by pressing the
relevant icon.
After selecting a warning or error from the list, it is possible to go to the erroneous
line by pressing the relevant icon.
Keys to move the cursor
To select the previous or next message or error.
To select the previous or next information page.
To select the first or last message or error from the list.