Fagor America CNC8070 - Manual (Page 169)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
6.
(S OFT V03.0 X )
135
When accessing the profile editor, the softkey menu shows the following options:
‡ Edit
To select the type of profile to be edited. Also too enlarge a profile, import a profile
saved in DXF format.
‡ Modify
To modify, insert or delete elements of a profile.
‡ Displayed area
To modify the zoom of the graphics area.
‡ Plane
To select the axes of the plane and their direction.
‡ End
It ends the profile editing session. Before exiting the profile editor, it will offer the
option to save or not the edited profile.
‡ Undo
To "undo" the last operation made.
‡ Save and continue
To save the profile and continue editing. Using this key does not require that the
profile be completed.
If the profile has been resolved, the CNC will insert it in the part program that is being
edited. If the profile cannot be resolved due to lack of data, the CNC will issue the
relevant message.