Fagor America CNC8070 - Manual (Page 195)

161
CNC 8070
(S OFT V03.0 X )
8
USER TABLES
User table selection
The user tables consist of the following tables:
• Zero offset table.
• Clamp tables (fixtures).
• Table of arithmetic parameters, global, local and common.
In order to activate a fixture zero or part zero offset, those values must be previously
stored in the relevant CNC table.
What can you do in this work mode?
The following operations are possible in this work mode:
• Edit and modify the tables for zero offsets and parameters.
• Save the content of a table.
• Recover the content of a table.
• Print the content of a table.
• Initialize a table.
The CNC tables may be accessed from any other operating mode, even while a
program is in execution, by pressing the key for these tables.