Fagor America CNC8070 - Manual (Page 259)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operation manual
8070 CNC
PLC
Pr
ogr
a
m
edi
ti
ng
(
s
of
tk
eys)
11.
(S OFT V03.0 X )
225
11.4 Program editing (softkeys)
11.4.1 Analyze
It analyzes the program searching for errors. The errors found will be displayed in the
"Outputs" service window.
11.4.2 File
It is used to restore, save, import or print a file.
File "Restore original"
This option will only be available when the "auto-save" option is active (the section
on
"11.4.6 Customizing" in this chapter).
It is used to recover the original file without the changes made since the last time it
was opened. When selecting this option, the CNC requests confirmation of the
command.
File "Save"
This option will only be available when the "manual-save" option is active (the section
on
"11.4.6 Customizing" in this chapter).
It is used for saving the file that is being edited.
File "Save as"
It is used to save the file, that is being edited, with a different name. After saving the
file, one keeps editing the new file.
File "Include program"
It is used to import the contents of a file saved at the CNC into the program that is
being edited.
File "Print"
It is used to print the file, that is being edited, out to a printer connected to the CNC.
To close this window and return to the editor, press [ESC]. To return to the editor
without closing the window, press the screen switching key.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.