8 canned cycles, Canned cycles, Cnc 8070 – Fagor America CNC8070 User Manual
Page 144
Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Ed
it
ing wi
ndo
w (
s
of
tk
eys)
(S
OFT
V03.0
X
)
110
6.3.8
Canned cycles
It is used to access the conversational canned cycles.
When selecting a canned cycle, the CNC displays the window for defining that canned
cycle. Some of these canned cycles may be associated with multiple machining so
it is repeated at all points.
The cycle defining window may also be accessed by selecting a canned cycle in the
program and pressing [RECALL].
The cycle being edited may also be simulated in the window for defining the
conversational canned cycle.
The programming manual offers a more detailed description of how to define and/or
simulate conversational canned cycles.
When selecting this option, the softkey menu shows the available canned cycles. To
return to the main menu, press the key for the previous menu.