1 appearance of the mdi mode, Appearance of the mdi mode, Cnc 8070 – Fagor America CNC8070 User Manual
Page 186
Operating manual
CNC 8070
7.
MDI
MODE
Appe
ar
a
n
ce of
t
he M
D
I m
o
de
(S
OFT
V03.0
X
)
152
7.1
Appearance of the MDI mode
When this operating mode is active, it will be indicated at the top right side of the
general status bar.
This mode may be displayed with several screens. The current screen and the total
number of available screens are shown at the upper right hand side of the general
status bar.
Switching between the different screens is done by pressing the MDI mode accessing
key. The screen selection is rotary in such a way that when pressing this key on the
last screen, it shows the first one of the operating mode.
Standard configuration
The standard configuration of this work mode, described in this manual corresponds
to the one supplied by Fagor. In some cases, the manual shows a sample screen,
instead of that of the CNC in order to make it easier to understand.
These screens may be customized by the machine manufacturer changing its
contents as well as its appearance. They may also remove certain screens or add
some of their own.