Fagor America CNC8070 - Manual (Page 128)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Appear
ance
of
t
h
e
edi
ti
n
g
-
s
im
u
la
ti
on
(S OFT V03.0 X )
94
6.1.2 Window description
As mentioned earlier, each screen may consist of one or many of the following
windows (later sections of this chapter describe each one of them in greater detail):
• Edit window: For editing new programs or modify the existing ones. Editing is
possible using a profile editor, a conversational canned cycle editor or using the
TEACH-IN feature.
• Graphic window: This window shows a graphic representation of the program
during the simulation. It also allows taking measurements on the graphics.
• Program window: For selecting the starting and ending conditions of the
simulation.
• Statistics window: For estimating the machining time for each tool and the total
program execution time.
When the screen consists of several windows, the softkey menu will show the options
of the active window. To switch windows and access the desired softkey menu, press
the relevant key.