Fagor America CNC8070 - Manual (Page 20)

VIII
CNC 8070
Ver
s
io
n
hi
st
or
y
(S OFT V03.0 X )
VIII
Software V3.01 July 2005
Feature
Lathe model
New machine parameters.
• CAN bus type selection (CANMODE).
• permit using the G95 function in jog mode (FPRMAN).
• Lathe model. Graphics configuration selection (GRAPHTYPECH).
• Lathe model. Axis configuration selection (GEOCONFIG).
• Set of parameters for synchronization (SYNCSET)
• Improved definition of kinematics for the C axis.
• Magazine-less system.
INST
Commands CNCRD and CNCWR. The channel number and the indexes may be defined
in the variables using an integer, a register or a symbol. INST
Ground tools for a turret magazine. The TMOPERATION may take the values 3, 4, 9 and
10. INST
Incline axis. INST / PRG
Improved coordinate transformation (#CS/#ACS).
• Keep the part zero when deactivating the transformation.
• Working with 45º spindles. Select between the two choices.
• Keep the rotation of the plane axes with MODE 6.
PRG
G33. New parameter (Q1) to define the entry angle. PRG
G63. Tool inspection is possible during rigid tapping. PRG
G112. G112 is no longer admitted for the spindle.
Kinetics definition when activating the C axis (#FACE / #CYL).
PRG
Change of criteria when assuming a new master spindle in the channel. PRG
Selecting the loop for an axis or a spindle (#SERVO ON/OFF) PRG
Spindle synchronization (#SYNC/#TSYNC/#UNSYNC) PRG
Canned cycle selection (#MILLCY/#LATHECY) PRG
New variables:
• Variable to read the accumulated PLC offset.
• Variable to obtain a linear estimation of the following error.
• Variables to read the instant value of feed-forward or AC-forward.
• Variable to know the line number of the file being executed.
• Variable to know what kind of cycle is active.
• Variable to know the tool orientation.
• Variable to know whether the HSC mode is active or not.
• Variable to know the theoretical feedrate on 3D path.
• Variable to know the number of the warning being displayed.
• The variable (V.)G.CNCERR is now per channel.
INST / PRG
Improved tool table. OPT