Fagor America CNC8070 - Manual (Page 210)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
9.
TOOL
AND MAGA
Z
INE TABLE
Showi
ng t
abl
es and com
m
on oper
at
io
n
s
(S OFT V03.0 X )
176
9.1.4 Printing the tables
Some of the tables may be printed in a printer accessible from the CNC or as a file
(PRN format). When the tables are saved as a file, it may be saved at the CNC, in
a floppy disk or at any other device (CNC, PC, etc.) connected through Ethernet. By
default, the files are saved in the folder "
C:\CNC8070\ USERS\ Reports ".
In either case, the action is carried out from the vertical softkey menu using the
following icon.
After selecting the target, press [ENTER] to start printing. Press [ESC] to cancel the
selection.
This icon starts printing. When pressing this icon, the CNC will show a
dialog box requesting the print destination for the table (printer or file).
Print destination
To select the print destination.
To print the drawing.
To cancel the printing.