Fagor America CNC8070 - Manual (Page 183)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
6.
(S OFT V03.0 X )
149
6.9.12 Profile editor. Example 2
Definition of a profile without rounding.
Rounding definition "A" and "B".
Select the "CORNERS" option and define:
Press [ESC] to quit the "CORNER" option.
End of editing
Select the "END" option and save the profile. The CNC quits the profile editor and
inserts the profile in the part-program.
Starting point X = 100 Y =20
Straight X = 80 Y =20
Straight X = 80 Angle = 90
Counterclockwise
arc
(1) Center X = 75 Radius = 5 Tangency = Yes
Counterclockwise
arc
(2) Center X = 100 Radius = 150 Tangency = Yes
Clockwise arc Center X = 40 Center Y = 80 Radius = 20 Tangency = Yes
The CNC shows the options for section 2. Select the correct one.
The CNC shows the options for section 1. Select the correct one.
Clockwise arc (3) Radius = 200 Tangency = Yes
Clockwise arc Center X = 80 Center Y = 160 Radius = 10 Tangency = Yes
The CNC shows the options for section 3. Select the correct one.
Counterclockwise
arc
(4) Radius = 40 Tangency = Yes
Clockwise arc Center X = 120 Center Y = 160 Radius = 10 Tangency = Yes
The CNC shows the options for section 4. Select the correct one.
Clockwise arc (5) Radius = 200 Tangency = Yes
Clockwise arc Center X = 160 Center Y = 80 Radius = 20 Tangency = Yes
The CNC shows the options for section 5. Select the correct one.
Counterclockwise
arc
(6) Center X = 100 Radius = 150 Tangency = Yes
The CNC shows the options for section 6. Select the correct one.
Counterclockwise
arc
(7) Center X = 125 Radius = 5 Tangency = Yes
The CNC shows the options for section 7. Select the correct one.
Straight (8) X = 120 Y =20 Tangency = Yes
The CNC shows the options for section 8. Select the correct one.
Straight X = 100 Y =20
Rounding Select point "A" Assign radius = 5 Press [ENTER]
Rounding Select point "B" Assign radius = 5 Press [ENTER]