Fagor America CNC8070 - Manual (Page 207)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
TOOL
AND MAGA
Z
INE TABLE
Showi
ng t
abl
es and com
m
on oper
at
io
n
s
9.
(S OFT V03.0 X )
173
9.1.2 Search for a text in the tables
It is possible to search for a text or a value in the list of tools and magazine positions.
The search is carried out from the vertical softkey menu.
To start or resume the search, press [ENTER] and the focus will position on the first
match found. Every time one of the icons is pressed, it offers the option to search for
the next match or to define a new search.
The search may be canceled by pressing the [ESC] key.
Define the search criteria.
Every time one of these icons is pressed, it shows a dialog box to define the search
criteria. The following may be defined in this dialog box:
• The text or value to search for.
• The beginning point of the search, namely either from the beginning of the table
or from the cursor position.
This icon starts the search. Once the icon has been pressed, the CNC will
display a dialog box to define the search criteria. The defined criteria is
maintained until a new one is defined.
This icon is shown when a search criteria has been defined; it makes it
possible to search for the next match using the current search criteria.
Find text
To move the cursor through the elements of the list.
It selects an option from a group.
To start the search.
To cancel the search and close the dialog box.