Fagor America CNC8070 - Manual (Page 271)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operation manual
8070 CNC
PLC
"Logi
c anal
yz
er
" ser
v
ic
e
11.
(S OFT V03.0 X )
237
11.9.2 Save, load and reset the analyzer configuration
Save the configuration
It is used to save the current configuration of the logic analyzer (PLC variables and
expressions, trigger conditions, graphic traces) into a file.
When selecting this option, the CNC shows a list of trace files (TRC) already saved.
To save the current configuration:
1. Define the file name at the bottom window. To replace an existing file, select it from
the list.
2. Press [ENTER] to save the configuration or [ESC] to return to the logic analyzer
without saving the configuration.
Load the configuration
It is used to recover a logic analyzer configuration that has been stored earlier.
When selecting this option, the CNC shows a list of trace files (TRC) already saved.
To load one of these files:
1. Define the file name at the bottom window or select it from the list.
2. Press [ENTER] to save the configuration or [ESC] to return to the logic analyzer
without loading the configuration.
Initialize the configuration
It is used to reset all the analyzer data eliminating the defined variables or expressions
as well as the trigger condition and trigger type. The traces are also deleted because
there are no variables to be analyzed.