Fagor America CNC8070 - Manual (Page 39)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
GENERAL CONCEPTS
Descr
ip
ti
on of
t
he key
s
1.
(S OFT V03.0 X )
5
1.3 Description of the keys
1.3.1 Keys associated with the information on the screen
Softkeys
The softkeys or functions keys may be used to select the different options shown on
the screen.
Using the screens
Help
Horizontal softkeys.
It selects the options of the horizontal menu.
Vertical softkeys.
It selects the options of the vertical icon menu.
Screen change.
Depending on how the OEM has set this key, it will be possible to perform one of
the following operations.
• Sequentially access the different screens of the active work mode. In the PLC
mode, it switches between the various active services.
• Sequentially access the different channels.
• The horizontal softkey menu shows the available screens and the vertical menu
shows the available channels.
Window change.
It is used to switch between the different windows of the screen.
Previous menu.
On the horizontal softkey menu, it lets you go up from the softkey sub-menu to the
previous level from where that menu was accessed.
Help.
It accesses the CNC's system help.