Declaration of conformity, Cnc 8070, Manufacturer – Fagor America CNC8070 User Manual
Page 21: We declare, Safety: electromagnetic compatibility
CNC 8070
(S
OFT
V03.0
X
)
IX
DECLARATION OF CONFORMITY
Manufacturer:
Fagor Automation, S. Coop.
Barrio de San Andrés 19, C.P. 20500, Mondragón -Guipúzcoa-
(SPAIN).
We declare:
under our responsibility that the product:
Fagor CNC8070 Numerical Control
meets the following directives:
Safety:
Electromagnetic compatibility:
As instructed by the European Community Directives 73/23/EEC,
m odification 93/68/ECC on Low Voltage and 89/336/CEE on
Electromagnetic Compatibility.
In Mondragón on February 1st 2002.
EN 60204-1
Machine safety. Electrical equipment of the machines.
EN 50081-2
Emission.
EN 55011
Radiated. Class A, Group 1.
EN 55011
Conducted. Class A, Group 1.
EN 61000-3-2
Current armonics.
EN 61000-3-3
Flickers and Voltage fluctuations.
EN 50082-2
Immunity.
EN 61000-4-2
Electrostatic discharges.
EN 61000-4-4
Bursts and Fast transients.
EN 61000-4-5
High Voltage conducted pulses (Surges).
EN 61000-4-11
Voltage fluctuations and Outages.
EN 61000-4-3
Radiofrequency radiated electromagnetic fields.
EN 61000-4-6
Conducted disturbance induced by radio frequency fields.