Fagor America CNC8070 - Manual (Page 141)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Ed
it
ing wi
ndo
w (
s
of
tk
eys)
6.
(S OFT V03.0 X )
107
6.3.6 Customizing
To customize the appearance and the properties of the editing window.
Customizing "Appearance" (looks)
It is used for personalizing the look of the different elements of the editing window
and the colors of the elements of the program.
When selecting this option, the CNC shows the dialog box with two panels. The first
one has the elements of the editing window that may be customized and the second
o ne th ose of th e program. Th e panel is se lec ted by the key co mbination
[CTRL]+[TAB].
After defining the new look, use the cursor to select one of the buttons here below
to accept or ignore the changes made and press [ENTER].
The dialog box may also be closed directly without accepting the changes by pressing
[ESC].
Customizing "Auto-Save / Manual save"
It is used to save the program automatically or manually.
• When "auto-save" is on, the CNC will automatically save the program after every
change.
• If "Manual save" is active, it is up to the operator to save the program. See
"6.3.2 File" on page 103.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.
(A) To accept the changes and close the dialog box.
(B) To ignore the changes and close the dialog box.
(C) To apply the changes and close the dialog box.
Set aspect
To move the cursor through the elements of the list.
To select an option of a group (A).
To turn on/off the checkboxes (C), and to open/close the drop lists
(B).
A
B
C
B
A C B